General information
Ercolina TB80 is a powerful rotary draw machine which is able to bend up to D76,1×5,4 mm stainless steel tube. This reliable machine is equipped with new TCPlus control which makes your bending tasks easier. There’s the possibility to execute left and right bends and the machine could be used with the mandrel accessory!
Models available:
- TB80 — three phase
- TB80PT — three phase
Ercolina Machine: Top Bender TB80 (First Prototyp)
Features
- TCPlus control
- 7” colour touch screen
- Icons for ease use
- Automatic mode, MDI manual mode, programming mode
- Advanced OFFSET function
- Easy language change
- Auto-tuning of the main machine components
- Programmable bending speed for each single bend of the program
- Unlimited programs possibility (USB port *)
- Every program can contain up to 30 different bends
- Possibility to bend left and right
Ercolina Machine: TB80 Rotary Draw Bending Machine
Ercolina Machine: TB80PT bending a solid stainless steel 50x20mm.
Ercolina Machine: TB80PT Bending At 50x50x3 mm On a Centerline Radius of 100 mm
Ercolina TB80 Top Bender
Standard equipment
- 80, 50 and 40 mm hex shafts
- Adapter for 40 and 50 mm hexagon
- Counterbending die support
- Handwheel
- 6 mm allen wrench key
- Ercolina grease spray
Technical data
| Flexion Modulus | 20 cm3 |
| Min. Outside diameter | 10 mm — 1/8″ Gas |
| Max Center line Radius (CLR) | 420 mm |
| Min Center line Radius (CLR) | 10 mm |
| Motor | 3,0 kW |
| Voltage requirement | 400 V/480 3PH/50-60 Hz |
| Bending Speed | 1,5/3,0 rpm |
| Dimensions | 1145 x 639 x 990 mm |
| Weight | 500 kg |
Maximum capacity
| Section | Material | 20 cm3 |
|---|---|---|
 |
Gas Tube | 2″1/2 x 5,16 |
|
Standard Steel Tube | 76,1 x 5,4 |
|
Furniture tube | 76 x 2 |
|
Hydraulic Steel ST35 | 50 x 10 |
|
Stainless Steel AISI 304-318 | 76,1 x 3,2 |
|
Stainless Steel AISI 308 | 76,1 x 3,2 |
|
Soft Brass | 76,1 x 14,2 |
|
Hard Copper & Aluminium | 76,1 x 6,3 |
|
Soft Copper | 76,1 x 16 |
